# Electromagnetic Waves And Radiating Systems Pdf

File Name: electromagnetic waves and radiating systems .zip

Size: 24378Kb

Published: 05.05.2021

- Electromagnetic Waves Radiating Systems
- Electromagnetic Waves and Radiating Systems
- Electromagnetic Waves and Radiating Systems 2nd Ed

Title page PDF. Dedication PDF. Preface PDF.

## Electromagnetic Waves Radiating Systems

Achieving robust propagation and guiding of electromagnetic waves through complex and disordered structures is a major goal of modern photonics research, for both classical and quantum applications. Although the realization of backscattering-free and disorder-immune guided waves has recently become possible through various photonic schemes inspired by topological insulators in condensed matter physics, the interaction between such topologically protected guided waves and free-space propagating waves remains mostly unexplored, especially in the context of scattering systems.

Here, we theoretically demonstrate that free-space propagating plane waves can be efficiently coupled into topological one-way surface waves, which can seamlessly flow around sharp corners and electrically large barriers and release their energy back into free space in the form of leaky-wave radiation.

The proposed topological wave-rerouting scheme is based on a stratified structure composed of a topologically nontrivial magnetized plasmonic material coated by a suitable isotropic layer.

Our results may open a new avenue in the field of topological photonics and electromagnetics, for applications that require engineered interactions between guided waves and free-space propagating waves, including for complex beam-routing systems and advanced stealth technology.

The application of relevant ideas of topological physics from solid-state electronic systems to the realm of photonics and electromagnetics is opening a new landscape of opportunities to realize optical structures that are robust under defects, discontinuities, and deformations [ 1 ], [ 2 ], [ 3 ].

A feature of particular relevance in these systems is the emergence of robust one-way surface states, which have been shown to exhibit unprecedented optical properties, such as disorder-immune propagation without back-reflection even in the presence of large scatterers and sharp bends [ 4 ], [ 5 ], [ 6 ], [ 7 ], [ 8 ], [ 9 ]. In such closed systems, topological surface waves cannot be excited directly by incident propagating waves without additional coupling schemes; instead, they are typically accessed through near-field excitation mechanisms [ 5 ], [ 6 ], [ 12 ] or external waveguides [ 13 ], [ 14 ].

In many scenarios, however, it would be highly desirable to bridge the gap between free-space propagating waves the continuous plane-wave spectrum supported by the surrounding environment and topological surface states confined and guided on a given structure.

This possibility may extend the realm of applications of topological wave physics to radiating and scattering devices and systems. Indeed, the coupling between free-space radiation and guided waves propagating on the surface of an object is one of the most fundamental electromagnetic and photonic processes.

Several open wave-guiding structures, such as leaky-wave antennas and optical couplers, have been designed in the past several decades to control and exploit this coupling in a variety of settings [ 15 ]. In this paper, we propose a general strategy to couple an incident propagating plane wave to a surface wave with topologically nontrivial properties and with controllable radiation loss. We show that such a surface wave can flow around sharp edges and large scatterers without inducing any back-scattering.

Furthermore, we also show that the topological surface wave can be coupled back into free space, in the form of leaky-wave radiation, thus providing a platform for topologically protected wave-rerouting around an arbitrarily shaped impenetrable object, as sketched in Figure 1A. A Concept figure illustrating the idea of topologically protected wave-rerouting and reradiation around a complex impenetrable object. A magnetically biased plasma, which behaves as a homogeneous topological photonic insulator, is coated with a topologically trivial isotropic plasmonic layer.

Topologically protected unidirectional leaky surface waves exist on the surface of the magnetized plasma, and they can propagate around the object without any back-scattering independently of the shape of the surface in the xy -plane. To efficiently couple incident propagating waves into the leaky surface waves and vice versa , we defined coupling regions with optimized coating thickness to minimize reflections and reradiation. The thickness of the plasmonic coating outside the coupling regions has been set to 1.

We would like to stress that the proposed idea of wave-rerouting via topological surface waves is completely different compared to any scheme based on metamaterial invisibility devices, which are fundamentally limited to simple small objects and narrow bandwidths, as recently demonstrated in different papers [ 16 ], [ 17 ], [ 18 ].

Our goal here is not to minimize the total scattering cross-section of a given object but rather to reroute electromagnetic energy around a complex shape without back-reflections even if the shape is modified or damaged. The proposed strategy is also drastically different from any schemes based on artificial impedance surfaces, holographic surfaces, and metasurfaces supporting surface waves, which have been used to guide waves around certain smooth objects e.

Our idea of topologically protected wave-rerouting and reradiation around a complex impenetrable object is illustrated in Figure 1. The design includes an impenetrable arbitrarily shaped object composed of a material acting as a photonic topological insulator for example, a magnetically biased plasmonic material separated by the surrounding free space by an isotropic partially transparent thin cover composed of, for example, an isotropic nonmagnetized plasmonic material.

It is assumed that the structure is translationally invariant along the z -axis, which is taken as the bias direction. As discussed in the following, the surface waves supported by this structure are unidirectional and topologically protected, and their coupling to radiation can be controlled by suitably engineering the isotropic cover. The topological classification of nonreciprocal materials is based on a topological invariant number known as Chern number, corresponding to an integral of the Berry curvature of the photonic bands over momentum space, which makes this class of topological materials the photonic equivalent of quantum Hall insulators [ 1 ], [ 2 ], [ 3 ].

Although topological properties have been studied extensively for periodic structures with discrete translational symmetry [ 1 ], [ 2 ], [ 3 ], [ 4 ], [ 5 ], [ 6 ], [ 7 ], [ 11 ], [ 12 ], [ 13 ], [ 14 ], 20 ], it has been recently shown that Chern numbers can also be defined for continuous media, such as a homogenous magnetized plasma [ 21 ], unveiling the topological nature of certain classes of unidirectional plasmonic surface states [ 22 ]. For magnetized plasmas, the permittivity tensor and its frequency-dispersive elements are given in Eqs.

The dispersion equation for the transverse-magnetic TM bulk modes in the plane orthogonal to the bias magnetic field of the bulk mode parallel to the bias can be written as. By following the approach presented in Refs. We restrict our attention to the TM modes since, for the transverse-electric TE mode, the electric field is along the bias; hence, the motion of the electrons is unaffected by the external magnetic field.

In this case, the mode becomes trivial as its properties are bias independent. The dispersion diagram in B is calculated for the plane orthogonal to the bias. C Complex dispersion curves of the leaky surface modes for various plasmonic coating thicknesses used in the coupling regions see Figure 1B. The green shaded areas denote the regions outside the light cone, which are not accessible with free-space propagating-wave excitation.

The imaginary part of the wavenumber in B has been omitted as it was found to be negligibly small. The different topological properties of the magnetized plasma and the isotropic cover produce one-way surface waves on their interface.

As usually done for simple transversely invariant layered structures, the dispersion curves for the surface plasmon-polariton SPP modes red curves in Figure 2 can be calculated analytically by considering the general form of the fields in each layer and imposing the relevant electromagnetic boundary conditions at the interfaces. The resulting homogenous system of equations yields the eigenmodes of the structure as well as their dispersion relation.

Instead, if TR symmetry is broken through an out-of-plane static magnetic field applied to the semi-infinite plasma region, a unidirectional SPP mode emerges within the plasma band-gap see Figure 2B.

As the number of one-way edge states is determined by the difference of the gap Chern numbers between interfaced materials bulk-edge correspondence [ 3 ], [ 21 ] , such surface waves are also topologically protected, implying unidirectional propagation without any back-scattering even in the presence of large disorder.

Two important observations should be made at this point. As discussed in the following, this enables a broadband wave-rerouting effect clearly, the bandwidth is also determined by the frequency-dispersive properties of the isotropic cover, which should be opaque, with negative permittivity, throughout the bulk-mode bandgap. Although the topological properties have been defined for the closed system with no radiation, namely, with a sufficiently thick cover, if radiation loss is small and can be treated as a perturbation, we can still safely treat any weakly-leaky mode as a topologically protected state.

The thickness of the isotropic cover can be used to control the coupling of the topological surface mode to outgoing plane waves and vice versa. Indeed, as seen in Figure 2C , the cover thickness directly controls the imaginary part of the modal wavenumber; in addition, the real part of k is only marginally affected if the cover is sufficiently thick.

This fact allows tailoring the radiation and propagation properties of the topological mode independently, as initially predicted in Ref. The surface wave can then be made to release its energy, in the form of leaky-wave radiation, at the opposite side.

Due to transverse-momentum conservation for the fields on a translationally invariant surface, however, if an impinging plane wave can couple to a leaky surface mode, the excited surface mode will also couple to radiation in the same spatial region, with the same efficiency, losing a significant portion of its energy right after the excitation [ 15 ]. The translational invariance of the structure should be broken to avoid this behavior. Instead, we note that breaking reciprocity does not break the equality between the in-coupling and out-coupling efficiencies for a guided leaky mode on a transversely invariant structure, which is just a consequence of transverse-momentum conservation.

We therefore define a coupling region, as shown in Figure 1B , where the thickness h of the isotropic cover is suitably varied along the x -axis to maximally couple the impinging energy into a surface mode that does not radiate back to free space. Considering the out-coupling region, at a given frequency, the amplitude of the wave emerging from the coating surface can be approximated as. Physically, the first exponential represents the decay, along the x -axis, of the surface wave due to radiation loss, whereas the second exponential represents the decay, along the y -axis, of evanescent waves within the opaque coating before they reach the surface.

The first exponential function always decays as a function of x , whereas the second exponential decays or grows as a function of x depending on whether h x increases or decreases, respectively. Heuristically, therefore, if we consider a monotonically decreasing ramp for the out-coupling region, the radiated wave emerging from the structure has maximum intensity at the center of the ramp, tailing off at the sides as the leakage is very small at the near end where the coating is thick and the surface wave is almost completely radiation-damped at the far end.

Thus, the leaky-wave radiation profile would resemble a Gaussian plane-wave beam. Furthermore, an incident beam of the same type is expected to efficiently couple into the surface mode if the in-coupling region is designed in the same way due to TR symmetry, with flipped bias. For simplicity, we have considered linearly increasing and decreasing ramps, as sketched in Figure 1B , for the in-coupling and out-coupling regions, respectively, and we have optimized the ramp properties angle and length for an incident and transmitted Gaussian plane-wave beam.

The optimized values are indicated in the caption of Figure 1. Thanks to the unidirectional nature of the leaky surface mode in our structure, no back-scattering is expected along these inhomogeneous coupling regions. In addition, we observe in Figure 2C that, when the thickness of the isotropic plasmonic coating is larger than approximately 0. Hence, the SPP mode becomes fully confined to the interface, without any coupling to radiation modes.

To verify our predictions, we have numerically modeled and simulated the proposed structure using a commercial software COMSOL Multiphysics [ 25 ] based on the finite-element method. As shown in Figures 3 and 4 , we consider an incident wave impinging on the surface of an impenetrable magnetized-plasma corner at a certain angle and at a frequency within the plasma bulk-mode bandgap.

The object is covered by an isotropic plasmonic layer with in-coupling and out-coupling regions as in Figure 1B. To demonstrate topologically-enabled wave-rerouting around this electrically-large object, we calculated the transmission of the propagating wave on the opposite side of the corner.

To quantitatively assess the impact of disorder, we carried out two comparative calculations: the transmission spectra, as a function of angle and frequency, for a surface having a simple right corner Figure 3A and for a highly disordered surface Figure 3B that includes sharp features and perfectly conducting PEC bullet-like barriers, which may model defects and damages to the structure.

Even more interestingly, the comparison of the results in Figure 3A and B indicates that the transmission is only marginally affected by the large imperfections and deformations: the two transmission spectra are basically identical at all frequencies within the bandgap, confirming the topological robustness of the proposed wave-rerouting effect. As expected, for every operational frequency, maximal transmission is obtained for a different incident angle, determined by the momentum-matching condition with the surface mode.

Indeed, the locus of the maximum transmission points in Figure 3 closely follows the topological surface mode dispersion in Figure 2B. Additional features in the transmission spectra at frequencies outside the bandgap are associated with the excitation of the plasma bulk modes. Angle-resolved transmitted power spectra for A a structure as in Figures 1 and 2 with a simple right corner and B a similar structure but with sharp features, discontinuities, and PEC obstacles.

The comparison of the results in A and B indicates that the transmission is almost completely unaffected by large imperfections and disorder at all frequencies within the bulk-mode bandgap of the topological material. The red dashed lines indicate the bandgap boundaries for the considered magnetized plasma. Steady-state amplitude distributions of the out-of-plane magnetic field for different cases of wave-rerouting around a complex electrically large object.

A—D The inner material is a topological photonic insulator a magnetically biased plasma with the same properties as in Figure 2 , which supports unidirectional topologically protected surface waves that can propagate around sharp corners and PEC obstacles white areas. E and F The inner material is topologically trivial and reciprocal the static bias has been switched off to show the field response for the case of non-topological surface waves.

The operational angular frequencies for each case are as follows: A and D 1. Animated movie files for B and F are included as Supplementary Materials and provide further details on the field propagation characteristics. To get detailed insight into the topologically protected propagation characteristics, we provide numerically calculated steady-state magnetic field distributions for various cases of interest in Figure 4.

Figure 4A—D reports the field distributions for the topological magnetically biased structure, illuminated by a plane-wave Gaussian beam, for different frequencies and surface shapes. The broadband operation of the topological wave rerouting scheme can be appreciated in Figure 4A—C : high transmission is obtained at all frequencies within the bulk-mode bandgap for angles at which the dominant transverse wavenumber of the incident plane-wave beam matches the momentum of the topological surface mode.

Furthermore, a comparison of Figure 4A and D clearly confirms that the presence of disorder, in the form of discontinuities, sharp features, and even PEC scatterers, does not induce any back-reflections or propagation losses.

We also note that reflection, diffraction, and reradiation is minimized in the in-coupling region thanks to the suitable design of the isotropic cover thickness, as indicated in Figure 1A and as discussed above. Finally, to further confirm the crucial importance of topological robustness, Figure 4E and F shows the field distributions for a topologically trivial case, in which the static magnetic bias has been switched off, converting the magnetized plasma into a reciprocal isotropic plasmonic material.

It is evident in Figure 4E and F that the non-topological surface waves are unable to overcome the complex-shaped surface and the PEC barriers. Instead, the surface waves are reflected and radiate back into free space notice the standing wave formed along the direction of the incident field or scatter into the bulk of the nonmagnetized plasmonic material.

Negligible electromagnetic energy is transmitted to the other side of the corner. Translating topological effects to the realm of photonics and electromagnetics has already led to radical innovation in the way we design structures and devices with increased robustness against imperfections and disorder. Moreover, such topological wave-rerouting effect has been shown to be relatively broadband, depending on the size of the bulk-mode bandgap, and almost completely independent of the shape of the object.

We have discussed how this exciting wave-rerouting behavior is enabled by the ability to control the propagation and radiation properties of one-way, topologically protected, leaky surface waves, supported by the surface of a topological photonic insulator, realized here in the form of a magnetically biased plasma. Although natural magneto-optical effects are typically weak at optical frequencies, different material platforms may be employed for the experimental verification of our proposed designs in different regions of the electromagnetic spectrum, including magnetized n -doped semiconductors such as n -type InSb operating at terahertz frequencies [ 26 ], [ 27 ], magnetized ferrites at gigahertz frequencies [ 28 ], and also structures with suitable spatiotemporal modulations that mimic the effect of the magnetic bias [ 29 ], [ 30 ].

The isotropic plasmonic cover may be coated onto the gyrotropic plasmonic material, with controllable thickness, by employing standard microcoating or nanocoating techniques, such as molecular beam epitaxy e. We would also like to note that, as the SPP modes supported by a magnetized plasmonic material are not accessible through a TE-polarized incident wave, we have considered only the case of TM polarization.

However, the proposed concept of topological wave-rerouting is general, and it may be extended to different topological platforms e. Our findings may have important practical implications, especially in areas such as stealth technology, robust signal rerouting, and full-duplex communications.

## Electromagnetic Waves and Radiating Systems

Contact seller. Seller Rating:. Used Condition: Good. Within U. Former Library book.

Open navigation menu. Close suggestions Search Search. User Settings. Skip carousel. Carousel Previous.

## Electromagnetic Waves and Radiating Systems 2nd Ed

Achieving robust propagation and guiding of electromagnetic waves through complex and disordered structures is a major goal of modern photonics research, for both classical and quantum applications. Although the realization of backscattering-free and disorder-immune guided waves has recently become possible through various photonic schemes inspired by topological insulators in condensed matter physics, the interaction between such topologically protected guided waves and free-space propagating waves remains mostly unexplored, especially in the context of scattering systems. Here, we theoretically demonstrate that free-space propagating plane waves can be efficiently coupled into topological one-way surface waves, which can seamlessly flow around sharp corners and electrically large barriers and release their energy back into free space in the form of leaky-wave radiation. The proposed topological wave-rerouting scheme is based on a stratified structure composed of a topologically nontrivial magnetized plasmonic material coated by a suitable isotropic layer. Our results may open a new avenue in the field of topological photonics and electromagnetics, for applications that require engineered interactions between guided waves and free-space propagating waves, including for complex beam-routing systems and advanced stealth technology.

Goodreads helps you keep track of books you want to read. Want to Read saving…. Want to Read Currently Reading Read. Other editions. Enlarge cover.

Skip to Main Content. A not-for-profit organization, IEEE is the world's largest technical professional organization dedicated to advancing technology for the benefit of humanity. Use of this web site signifies your agreement to the terms and conditions.

The electromagnetic wave propagation around human body torso is modelled by considering elementary electric and magnetic dipoles over an infinite muscle-equivalent cylinder. In addition, it was found that axial magnetic field component is crucial for communication via creeping waves since it generates modes with smaller field decay compared to axial electric field. The developed model may thus serve as a practical guideline in design of on-body wearable antennas. The theoretical considerations are verified with simulations and measurements on the prototype of PIFA antenna placed on the human body.

Фонтейн заплатил за этого бегемота дешифровки два миллиарда и хотел, чтобы эти деньги окупились сполна. Каждая минута простоя ТРАНСТЕКСТА означала доллары, спущенные в канализацию. - Но, Мидж… - сказал Бринкерхофф. - ТРАНСТЕКСТ не устраивает перерывов. Он трудится день и ночь.

*Нам придется ее отложить.*

Вы ошибаетесь, сэр! - вскричал Чатрукьян. - И если он проникнет в главную базу данных… - Что еще за файл, черт возьми. Покажите мне. Чатрукьян заколебался. - Я не могу.

Рухнул не только его план пристроить черный ход к Цифровой крепости. В результате его легкомыслия АНБ оказалось на пороге крупнейшего в истории краха, краха в сфере национальной безопасности Соединенных Штатов. - Коммандер, вы ни в чем не виноваты! - воскликнула .

Он так торопился, что не заметил побелевших костяшек пальцев, вцепившихся в оконный выступ. Свисая из окна, Беккер благодарил Бога за ежедневные занятия теннисом и двадцатиминутные упражнения на аппарате Наутилус, подготовившие его мускулатуру к запредельным нагрузкам. Увы, теперь, несмотря на силу рук, он не мог подтянуться, чтобы влезть обратно. Плечи его отчаянно болели, а грубый камень не обеспечивал достаточного захвата и впивался в кончики пальцев подобно битому стеклу. Беккер понимал, что через несколько секунд его преследователь побежит назад и с верхних ступеней сразу же увидит вцепившиеся в карниз пальцы.

* - Мы упускаем последнюю возможность вырубить питание. Фонтейн промолчал.*